EZ-Bend®室内和室外电缆解决方案

使用ez弯曲加固电缆, 用户已经扩展了MDU的选项, 内部布线和攻击, 空间受限路由环境. 当需要低调和耐用时,选择3.0毫米的产品. 对于要求更高的部署,EZ-Bend 4.8坚固的电缆是理想的. EZ-Bend加固的电缆s are purposefully designed for installations indoor, 室外和室内立管. These cables can be routed around sharp corners 和 stapled using traditional fast 和 easy installation practices, 信号损失可忽略不计, 并可提供一套完整的终端, 用于任何类型的建筑和生活单元的模块和电缆.

EZ-Bend加固的电缆

ez -弯曲光纤电缆
EZ-Bend电缆
  • EZ-Bend G.657.B3光纤带2.5毫米弯曲半径,是行业标准的两倍.
  • 向后兼容G.652.D纤维,
  • offered as factory-connectorized 和 tested assemblies or Reel-in-the-Box,
  • 3.0毫米或4.直径8毫米的坚固绳索,包括调音选项,
  • 100磅拉力,由芳纶强度构件实现
  • 适用于室内分布,室外包括地下和立管,
  • 可以用拉链、订书钉或夹子来固定,
  • plenum 和 dual-rated low-smoke zero-halogen (LSZH) construction with fire ratings including UL, 全会和欧洲CPR(建筑产品法规)认证

EZ-Bend加固电缆用于 以下应用:

  • 减少电缆:地下下降电缆选项包括单光纤ez -弯3.0毫米和4毫米.8mm加固线缆和ez弯折调音线缆. The toneable cables enable easy above ground locating of buried cables to help avoid cable cuts when other underground systems are installed. These drop cables are installed from the aerial terminal down the pole to the ground, 然后被掩埋,以最大限度地减少对景观的破坏, 或者被拉进现有的管道. The cable is then connected into a demarcation box installed at the side of the house, 理想的位置靠近光网络终端(ONT)上
  • Multifiber滴包: Multifiber滴包 provide the added benefit of saving time in installation by pulling 5, 6或12个组件. 这些多纤维下降捆绑功能加固4.8mm室内外电缆,敷设在室外. The coils are located at each of the windows of the living unit where each individual end connectorized end will enter the living unit through the window seal connecting to the ONT. The un-connectorized end of the bundle is spliced into a Fiber Distribution Terminal (FDT), 位于建筑物地面或顶部的.
  • 加固组件或绳索: The EZ-Bend加固的总成 are factory connectorized cables designed to withst和 stapling while exhibiting negligible bend loss to help save time 和 money on installation. The innovative design conquers sharp corners without the need for bend management 和 is ideal for MDU indoor 和 outdoor drops to connect to the ONT inside the living unit, 也可用于家庭或商业建筑的电缆连接. 另一方面, EZ-Bend加固的电缆s are also available for bulk purchase as Reel-in-the-Box when installers prefer to cut custom lengths using fusion splicing for in-field splicing or mechanical connectors.

EZ-Bend常见问题

1. What are the benefits of using specially designed bend-insensitive fiber cable to 和 into the dwelling unit or office?

许多因素都会造成光纤损耗. 一个主要的因素是紧弯.  当光纤在一定半径范围内弯曲时, light in the core is no longer guided in the core of the fiber creating loss which can slow internet speeds 和 streaming applications or shut down service completely.

EZ-Bend具有行业中最低的紧致弯曲损耗性能.

2. 为什么光纤的弯曲灵敏度在今天备受关注?

随着光纤到户(FTTH)的出现, 例如,纤维现在正在被安装在新的路径上, around doorframes 和 wall studs – where they are being bent 和 stapled like copper by installers, 有些人之前没有做纤维的经验. New applications use advanced adhesives to attach fiber 和 route it around corners.

EZ-Bend may be stapled 和 bent around sharp corners twice as tight as competitor fibers, down to 2.5毫米弯曲半径.

3. What are some of the typical bend stresses an installer needs to be aware of?

导致信号丢失的应激诱因包括:

  • 钉在尖角处
  • 抽条和通过管道
  • 埋地安装

EZ-弯曲,当安装正确时,减少这些损失.

4. 是否有可提供的光纤,以最大限度地减少损失在紧弯?

是的,EZ-Bend光纤可以. A special OFS实验室 patented fiber core design greatly improves the bending performance of EZ-Bend 光纤 when it experiences bends either during or after installation.

5. What bend-insensitive fiber optic cables are specially designed for residential use?

一旦纤维进入,到达家并进入住宅, 客户通常决定条款, 而弯曲病可能变得无法控制.  Conforming the optical cable around tight corners around the base of a home, 在家里, or in an apartment without using expensive unsightly bend management is strongly preferred by customers, 安装程序的部署也更加容易. 对于这些应用程序, OFS提供EZ-Bend加固电缆和电缆组件, 以及用于内部生活单元部署的InvisiLight®光学解决方案. All the EZ-Bend Cabling solutions 和 InvisiLight Solutions use EZ-Bend 光纤, 哪个比ITU-T G更好并符合.657.B3推荐. EZ-Bend 光纤 provides ultra-bend insensitivity where it is needed (typically wrapping homes, 在家里, 或大规模部署FTTH的公寓). 这些电缆可以沿着走廊的许多尖锐的角落运行, 窗户和门框周围, 以及其他有大量急转弯的道路. The cables may be secured by stapling or in the case of InvisiLight Solution using specially designed adhesives.

EZ-Bend®单模光纤手册

6. What are the benefits of using specially designed bend-insensitive fiber cable to 和 into the dwelling unit or office?

OFS EZ-Bend加固的电缆 和 Cable assemblies provide a differentiated solution for any communication services provider seeking to connect subscribers 在家里 和 MDUs.

福利包括:

  • Easy low-skill installation of optical fiber from the curb to 和 into the home to the indoor ONT.
  • More economical to use per home compared to micro-duct systems 和 indoor moldings.
  • Can save additional money: No need to transition enclosure from outside to inside.
  • Improved Wi-Fi coverage: Easily transitioned to InvisiLight Fiber inside the cable to reach inside the living unit to the optimum placement of the ONT/Wi-Fi Router.
  • Maybe stapled 和 bent around sharp corners twice as tight as the best competition, down to 2.5毫米弯曲半径.
  • 与竞争对手G.657 b光纤电缆.
  • Reliable performance based on over 4M living units (和 some businesses) connected since 2009 by 6 Tier 1 service providers, 几十个二级和三级

The EZ-Bend加固的电缆 和 Cable Assembly Video below is a comprehensive Installation Guide.

EZ_Bend安装视频

OFS can also provide live virtual training on all aspects of EZ-Bend 和 InvisiLight Solutions!

7. 如何融合拼接弯曲不敏感纤维?

OFS can also provide live virtual training on all aspects of EZ-Bend 和 InvisiLight Solutions!

8. 今天谁在使用EZ-Bend电缆和隐形灯解决方案?

Multiple Tier 1 Communications 服务 Providers in North America 和 Europe have deployed EZ-Bend cabling 和 InvisiLight Solutions to Millions of subscribers since the launch of EZ-Bend cabling in 2009.

下载 & 资源

案例研究

知识库

Our scientists 和 engineers create the products 和 solutions that become industry st和ards. 德赢娱乐注册会在网站上公布他们的研究结果和最重要的出版物.知识库的电子书

 

They discuss a wide variety of topics ranging from our suggested solutions to technical problems to breakthroughs in numerous products.

 

访问德赢娱乐注册的知识库